Teensy 3.6 PJRC

DESCRIPTION

The Teensy 3.6, a small breadboard-friendly development board, brings a low-cost 32-bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming directly in C language. Teensy 3.6 is an upgrade over 3.2 and 3.5, for when you need even more power. Designed by Paul Stoffregen and PJRC.

The latest in the line of very powerful, USB-capable microcontrollers, the Teensy 3.6 development board is faster, more capable, and bigger, putting even more pins on a solderless breadboard. Teensy 3.6 offers a little bit more in its features (MCU, RAM, Flash, clock and some peripherals) and has a USB High Speed (480 Mbit/sec) port accessed using 5 pins on the board. Version 3.6 features a 32-bit 180 MHz ARM Cortex-M4 processor with a floating point unit. All digital and analogue pins are 3.3 volts. Do not apply more than 3.3V to any signal pin.

Please Note:

• Teensy 3 boards are not official Arduino-brand products.
• Although the Teensyduino IDE has been adapted so that many Arduino projects will work with the Teensy, there will still be a lot of libraries and shields that may not work with this device!
• If you’re new to microcontrollers, we suggest going with a classic Arduino UNO since all Arduino projects, examples and libraries will work with it.

FEATURES

Unique v3.6 Specifications:

• 180 MHz ARM Cortex-M4 with Floating Point Unit
• 1M Flash, 256K RAM, 4K EEPROM
• Microcontroller Chip MK66FX1M0VMD18
• USB High Speed (480 Mbit/sec) Port
• 2 CAN Bus Ports
• 32 General Purpose DMA Channels
• 22 PWM Outputs
• 4 I2C Ports
• 11 Touch Sensing Inputs

Specifications & Features:

• 62 I/O Pins (42 breadboard friendly)
• 25 Analog Inputs to 2 ADCs with 13 bits resolution
• 2 Analog Outputs (DACs) with 12-bit resolution
• 20 PWM Outputs (Teensy 3.6 has 22 PWM)
• USB Full Speed (12 Mbit/sec) Port
• Ethernet mac, capable of full 100 Mbit/sec speed
• Native (4-bit SDIO) micro SD card port
• I2S Audio Port, 4 Channel Digital Audio Input & Output
• 14 Hardware Timers
• Cryptographic Acceleration Unit
• Random Number Generator
• CRC Computation Unit
• 6 Serial Ports (2 with FIFO & Fast Baud Rates)
• 3 SPI Ports (1 with FIFO)
• 3 I2C Ports (Teensy 3.6 has a 4th I2C port)
• Real-Time Clock

RESOURCES

• Microcontroller Chip MK66FX1M0VMD18 Datasheet
• Teensy USB Development Board Documentation