Arduino MKR Vidor 4000 Arduino

DESCRIPTION

RETIRED PRODUCT – We’ve stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page remains available for its resources and as a source of potential interest.

With the MKR VIDOR 4000, you can configure it the way you want; you can essentially create your own controller board. It comes loaded with hardware and potential: an 8 MB SRAM; a 2 MB QSPI Flash chip — 1 MB allocated for user applications; a Micro HDMI connector; a MIPI camera connector; and Wifi & BLE powered by U-BLOX NINA W10 Series. It also includes the classic MKR interface on which all pins are driven both by SAMD21 and FPGA. Plus, it has a Mini PCI Express connector with up to 25 user programmable pins.

The FPGA contains 16K Logic Elements, 504 KB of embedded RAM, and 56 18×18-bit HW multipliers for high-speed DSP. Each pin can toggle at over 150 MHz and can be configured for functions such as UARTs, (Q)SPI, high resolution/ high-frequency PWM, quadrature encoder, I2C, I2S, Sigma Delta DAC, etc.

The onboard FPGA can be also used for high-speed DSP operations for audio and video processing. This board also features a Microchip SAMD21. Communication between FPGA and the SAMD21 is seamless.

FEATURES

• FPGA:
• Intel Cyclone 10CLO16, Mini PCI express port with programmable pins
• Camera Connector: MIPI camera connector
• Circuit Operating Voltage: 3.3V
• Digital I/O Pins: 22 headers + 25 Mini PCI express
• PWM Pins: All Pins
• UART: Up to 7
• SPI: Up to 7
• I2C: Up to 7
• Analogue I/O Pins: N/A
• DC Current per I/O Pin: 4 or 8mA
• Flash Memory: 2MB
• SDRAM: 8MB
• Clock Speed: 48 MHz – up to 200 MHz
• Video Output: Micro HDMI
• Microcontroller:
• Microchip ATSAMD21 (Arm Cortex-M0+ processor)
• Wi-Fi: U-Blox Nina-W102
• Vin: 5V
• Supported Battery: LiPi Single Cell, 3.7V, 700mAh Min
• Circuit Operating Voltage: 3.3V
• Digital I/O Pins: 22
• PWM Pins: 12
• UART: 1
• SPI: 1
• I2C: 1
• Analogue Input Pins: 7
• External Interrupt Pins: 8
• Flash Memory: 256KB
• SRAM: 32KB
• EEPROM: No
• Clock Speed: 32.768 kHz (RTC), 48 MHz
• Analogue Output Pins: 1

RESOURCES

•  Schematic