DESCRIPTION
This breakout board has no active components on it. It’s just a connector you can plug an HDMI/DVI cable into, and 220-ohm series resistors. There’s a spot for an I2C EEPROM and some resistors, but those are for advanced folks who may want to create a ‘sink’ device with an EDID.
FEATURES
- Product Dimensions: 30.4mm x 21.6mm x 8.5mm / 1.2″ x 0.9″ x 0.3″
- Product Weight: 3.9g / 0.1oz
RESOURCES
Wire up the bottom pins from your Pico board with the following
- GP12 to D0+
- GP13 to D0-
- GP14 to CK+
- GP15 to CK-
- GP16 to D2+
- GP17 to D2-
- GP18 to D1+
- GP19 to D1-
Tutorial