DESCRIPTION
Add high-quality motion, direction, and orientation sensing to your Arduino project with this all-in-one 9 Degree of Freedom (9-DoF) sensor with sensors from ST. This little breakout contains two chips that sit side-by-side to provide 9 degrees of full-motion data.
The board includes an ST LSM6DS3TR-C (a.k.a LSM6DS3), a great entry-level 6-DoF IMU accelerometer + gyro. The 3-axis accelerometer can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The 3-axis gyroscope can measure spin and twist.
This chip is very similar to the now-discontinued LSM6DS33, a great entry-level IMU. As part of the illustrious LSM6DS family, it’s well-established and well-supported, and this chip even has better performance!
It also includes a LIS3MDL 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. The three triple-axis sensors add up to 9 degrees of freedom, by combining this data you can orient the board. Check out our guide on how to do that!
To make getting started fast and easy, the sensors have been placed on a compact breakout board with voltage regulation and level-shifted inputs. That way you can use them with 3V or 5V power/logic devices without worry. To make usage simple, Adafruit has exposed only the I2C interface and some interrupt pins from each chip. The breakout comes fully assembled and tested, with some extra header so you can use it on a breadboard. Four mounting holes make for a secure connection.
Additionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!). The included SparkFun Qwiic compatible STEMMA QT connectors for the I2C bus mean you don’t even need to solder! Just wire up to your favourite micro like Feather with a plug-and-play cable to get 9 DoF data ASAP. You can change the I2C addresses on the back using the solder jumpers, to have two of these sensor boards on one bus.
Adafruit has written libraries to help you get these sensors integrated with your Arduino/C++. This library covers the accel/gyro and this library is for the magnetometer. For advanced Arduino usage, ST has its own fully-featured library that includes extras such as FIFO management and tap detection for the LSM6DS3TR-C and also for the LIS3MDL magnetometer.
Please Note:
- It is not firmware-compatible with the ‘DS33, so you will need to recompile code (e.g our Arduino and Python libraries support the whole family but you do have to indicate which exact chip you’re using)
- QT Cable is not included, but we have a variety in the shop.
FEATURES
LSM6DS3TR-C Specifications:
- ±2/±4/±8/±16 g full scale
- ±125/±250/±500/±1000/±2000 dps full scale
- I2C or SPI hardware interface
- Up to 1.6 KHz ODR
- Tap and double-tap detection
- Free-fall detection
- Pedometer/shake detection
- I2C Address 0x6A or 0x6B
LIS3MDL Specifications:
- ±4/±8/±12/±16 gauss selectable magnetic full scales
- Continuous and single-conversion modes
- 16-bit data output
- Interrupt generator
- I2C Address 0x1C or 0x1E
RESOURCES
- Primary Guide: Adafruit LSM6DS3TR-C + LIS3MDL – Precision 9 DoF IMU
Fast Shipping with Professional Packaging
We can offer a variety of shipping options thanks to our long-term partnership with UPS FedEx DHL. Our warehouse staff is highly skilled and will wrap your goods according to our precise and accurate specifications. Before they are shipped the goods are carefully inspected and secured. We deliver to thousands of clients every day in a variety of countries. The fact that we're committed to becoming the biggest online retailer in the world is obvious. The warehouses are located situated in Europe as much as they are in USA.
Note: Orders containing more than one item will be assigned a separate processing period for each item.
Prior to shipment, all purchased products will be thoroughly inspected. Today, the majority orders will be sent within 48 hours. Expected delivery time is between 3 and 7 days.
Returns
The inventory is always changing and we cannot completely manage it because multiple stakeholders are involved, including our factory and warehouse. The stock levels may fluctuate at any given time. It is possible that the stock may run out after your order has been processed.
The policy is for 30 days. If it's been more than 30 days since you've bought the item We're sorry to say that we can't offer you a full refund or exchange.
You are able to return an item when it's unopened and is in the same state as the day you received it. You must have the item in the original packaging.
Related products
Component
1.14 inch LCD Display Module for Raspberry Pi Pico – 65K Colors – 240×135 – SPI Seeed Studios
Component
