3.3V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F3S5CMA Pololu

DESCRIPTION

The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3V (default) or 5V (selectable) output whether it is higher or lower than the input voltage, which can range from 2V to 16V. (Note: minimum start-up voltage is 3V, but it operates to 2V after that.) The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge. The compact module can supply a typical output current of up to 1.5A when the input voltage is close to the output voltage.

FEATURES

• Minimum Operating Voltage: 2V
• Maximum Operating Voltage: 16V
• Maximum Output current: 1.5A
• Output Voltage: 3.3V
• Reverse Voltage Protection: No
• Maximum Quiescent Current: 1mA
• Low-Voltage Cutoff: Adjustable

Please Note:

• The minimum startup voltage is 3V, but the regulator can operate down to 2V after startup.
• Under typical conditions, where the input voltage is close to the output voltage. The maximum output current can be higher when stepping down and lower when stepping up.
• Output can be changed to 5V by driving the SEL pin over 1.1V.
• With no load. The actual quiescent current depends on input voltage; it is typically under 300µA when the input voltage is close to the output voltage.

RESOURCES

• Dimension diagram for the Step-Up/Step-Down Voltage Regulator S9V11x Note: this dimension diagram does not apply to the smallerS9V11F5.
• 3D model of the Step-Up/Step-Down Voltage Regulator S9V11x Note: this model does not apply to the smaller S9V11F5.
• Drill guide for the Step-Up/Step-Down Voltage Regulator S9V11x This DXF drawing shows the locations of all of the board holes. Note that this does not apply to the smaller S9V11F5.