DESCRIPTION
Ahoy! It’s time to create a dazzling light up project with the new RGB Matrix FeatherWing. Now you can quickly and easily create projects featuring your favourite 16 or 32-pixel tall matrix boards. Using the RGB Matrix library is easy and works wonderfully with any of the M0 or M4 based Feathers.
This wing can be assembled in one of two ways. You can either solder in a 2×8 IDC shrouded header on the top, then plug in the IDC cable that came with your matrix. This makes it easy to stack on top of your Feather. Or, you can solder in the 2×10 socket header on the bottom of the Wing, and then stack your Feather on top. That way you can plug it directly into the back of the matrix *mind blown*
This FeatherWing will work great with any of AdaFruits 16×32, 32×32 or 64×32 RGB matrices and is definitely the easiest way to glow and go.
Either way, if you decide to go, you can plug a 5V DC power pack into the 2.1mm DC jack. That 5V is polarity protected and then outputs on the other side to a 5.08mm terminal block. An onboard regulator will provide 3.3V power to your Feather so you don’t need a separate USB or battery, this makes for a very compact build!
Each order comes with one FeatherWing PCB with surface mount parts attached, a 2×8 IDC header, a 2×10 female socket, a 2.1mm DC jack, a 5.08mm terminal block, and some male header.
Please Note:
- This wing is only tested/designed to work with the SAMD21 M0 and SAMD51 M4 Feathers. It’s not for use with any other Feathers at this time.
FEATURES
- Dimensions 51mm x 23mm x 4mm / 2″ x 0.9″ x 0.2″
RESOURCES
- Primary Guide