DESCRIPTION
The I2C Encoder Mini is a small board that allows you to use a rotary encoder with an I2C bus. This can be useful in case you have few GPIOs because the 3 pins allow you to control up to 127 devices. The I2C Encoder Mini will count and store every movement of the encoder, so no need to check the rotary encoder in real-time, the I2C Encoder Mini will do it!
This new version is powered by the ATtiny 402. It has a similar feature to big brother, but it supports only the mechanical encoder (no RGB) and there are no GP pins. The I2C Encoder Mini has pre-soldered the pull-up resistor on the I2C bus. This can be enabled by soldering a jumper.
FEATURES
- I2C bus working up to 400kHz
- Possibility to customize the I2C address with the I2C bus
- It supports the standard rotary encoder
- Open-drain Interrupt output pin, so no need to continuously poll the devices
- 5 pin header 2.54mm pitch on the left and right side, also the JST-XH fit
- 127byte of internal EEPROM
- Voltage range is 3.3V to 5V
- Maximum A/B signal frequency: 100Hz (Tested)
- Dimension of 23x19mm or 0.9×0.74in
- Open source project
There are 4 32bit signed int registers:
- CVAL: Current value of the Encoder. This value changes every time the encoder rotates.
- CMAX: Maximum value that CVAL can reach
- CMIN: Minimum value that CVAL can reach
- ISTEP: How much the CVAL has to increment at each and every encoder step.
| Address Range | Name | Description | Dimensions | Default Value |
| 0x00 | GCONF | General Configuration | 1 Byte | 0 |
| 0x01 | INTCONF | INT Pin Configuration | 1 Byte | 0 |
| 0x02 | ESTATUS | Encoder Status | 1 Byte | 0 |
| 0x03 – 0x06 | CVAL | Counter Value | 4 Byte | 0 |
| 0x07 – 0x0A | CMAX | Counter Max Value | 4 Byte | 0 |
| 0x0B – 0x0E | CMIN | Counter Min Value | 4 Byte | 0 |
| 0x0F – 0x12 | ISTEP | Increment Step Value | 4 Byte | 0 |
| 0x13 | DPPERIOD | Double Push Period | 1 Byte | 0 |
| 0x70 | IDCODE | Unique Number of the Device | 1 Byte | 0x39 |
| 0x71 | VERSION | HW and FW Version | 1 Byte | 0x10 |
| 0x72 | I2CADDRESS | Set a Custom I2C Address | 1 Byte | 0 |
| 0x81 – 0xFF | EEPROM | EEPROM Memory | 127 Byte | 0 |
RESOURCES
- Project
- Arduino Library
Fast Delivery and professional packaging
We provide a variety of shipping options owing to our long-standing relationships with UPS, FedEx and DHL. Our warehouse staff is extremely skilled and will package your products according to our precise and precise specifications. Prior to shipping, your goods will be thoroughly examined and secured. We deliver to thousands of customers each day from multiple countries. This shows our commitment to being the largest retailer online in the world. Warehouses and distribution centres can be located throughout Europe and the USA.
Note: Orders with more than one item will be assigned a distinct processing time based on the individual item.
Prior to shipping, we examine the items ordered carefully before shipping. The majority of orders will be sent within 48 hours. The expected delivery time is 3 to 7 days.
Returns
The stock is dynamic and we are unable to control it completely because multiple parties are involved, which includes our factory and warehouse. The actual stock can be changed at any time. It is possible that stock may run out after the order has been made.
Our policy is valid for a period of 30 days. If you don't receive your product within 30 days, we're unable to offer a refund or an exchange.
Your item must be in its original packaging and not be used. You must have the item in its original packaging.
Related products
Component
