DESCRIPTION
RETIRED PRODUCT – We’ve stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page remains available for its resources and as a source of potential interest.
M5Stick-C is a mini M5Stack, powered by an ESP32, is a portable, easy-to-use, open-source IoT development board.
What it can do? This tiny block is able to help you realise your project ideas by enlightening your creativity and helping with your IoT prototyping quickly while taking away the pain and frustration from the development process.
M5stickC is one of the core devices in M5Stack product series which is a continually growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as open-source code & engineering communities that will help maximise your abilities in every step of the development process.
FEATURES
Product Features
- 5V DC Power Supply
- USB Type-C
- ESP32-Based
- 4 MByte Flash + 520K RAM
- 6-Axis IMU MPU6886
- Red LED
- IR Transmitter
- Microphone
- 2 Buttons
- TFT LCD(0.96 inch) 80 x 160 pixels
- 1 Reset Button
- 2.4G Antenna: Proant 440
- 80 mAh Lipo Battery
- Extendable Socket
- Grove Port
- Wearable & Wall mountable
- Development Platforms: UIFlow, MicroPython, Arduino
ESP32
- Features
- 240 MHz dual-core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual-mode Bluetooth (classic and BLE)
- Hall sensor
- 10x capacitive touch interface
- 32 kHz crystal oscillator
- PWM/timer input/output available on every GPIO pin
- SDIO master/salve 50MHz
- SD-card interface support
- Pin Setup
- LED & IR Transmitter & Buttons
- GPIO 10 – LED
- GPIO 09 – Transmitter
- GPIO 37 – Button A
- GPIO 39 – Button B
- TFT LCD
- GPIO 15 – TFT_MOSI
- GPIO 13 – TFT_CLK
- GPIO 23 – TFT_DC
- GPIO 18 – TFT_RST
- GPIO 05 – TFT_CS
- Grove
- GPIO 33 – SCL
- GPIO 32 – SDA
- 5V – 5V
- GND – GND
- Microphone
- GPIO 00 – SCL
- GPIO 34 – SDA
- 6-Axis and Power Management
- GPIO 22 – SCL
- GPIO 21 – SDA
Power Switch Operation
- Power on:Short press power button for 2 seconds
- Power off:Long press power button for 6 seconds
Parts List
- 1x M5StickC
- 1x USB Type-C cable
RESOURCES
Quickstart Setup
Datasheets:
- ESP32-PICO
- ST7735S
- BM8563
- MPU6886
- AXP192
- SPM1423
Arduino Examples
- M5StickC factory test code
- M5StickC Vending Machine