VCNL4040 Proximity and Lux Sensor – STEMMA QT / Qwiic Adafruit

DESCRIPTION

The VCNL4040 is a handy two-in-one sensor, with a proximity sensor that works from 0 to 200mm (about 7.5 inches) and light sensor with a range of 0.0125 to 6553 lux.

When you need to measure a small distance with reasonable accuracy, such as the rough height, the VCNL4040 Proximity Sensor from Vishay can do that for you. If perchance you also needed to measure the amount of light at the same time, you’re in luck! The VCNL4040 can do that too.

To make life easier so you can focus on your important work, they’ve taken the VCNL4040 and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather/Raspberry Pi) or 5V (Arduino/ Metro328) logic levels. Additionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  Adafruit has even included SparkFun Qwiic compatible STEMMA QT connectors for the I2C bus so you don’t even need to solder! Just wire up to your favourite micro and you can use our CircuitPython/Python or Arduino drivers to easily interface with the VCNL4040 and make approximate approximations of proximity in no time!

To give you some ability to tune your measurements for your situation, the VCNL4040 lets you adjust the integration time (how long light is being measured) to set the sensitivity of your measurements depending on the lighting conditions. With an integration time of 80ms, since the sensor is only collecting measurements for a short period of time, each measured bit of light represents a larger amount of light. For this reason, the maximum range in lux for the 80ms integration time is 6553.5 lux.

If you use a longer integration time and get the same amount of light measurements “events”, you know that there is comparatively less light because we’re waiting around longer for light to show up and get the same number, meaning the rate of light events is lower. For this reason, at the maximum integration time of 640ms, the VCNL4040 will only measure up to 819.2 lux.

It is also worth keeping in mind that as you increase the integration time you are also increasing the sensitivity and resolution within the measurement range

In addition to adjusting the sensitivity of light measurements, you can change the current and duty cycle of the IR LED that powers the proximity detection to adjust how sensitive proximity measurements are

FEATURES

• Product Dimensions: 25.3mm x 17.8mm x 4.6mm / 1.0″ x 0.7″ x 0.2″
• Product Weight: 1.7g / 0.1oz

RESOURCES

• Diagrams, libraries, code examples, datasheets, and more are all in the learning tutorial